简体中文English

Solution

Liquid packaging, transportation, warehousing solutions
In order to control the discharge of various viscosity and the discharge of the filling goods, it is necessary to choose the correct discharge valve.

Handling and stacking
● The product is equipped with a set chassis, which can provide ultra-long and strong protection for content.
● The product has the characteristics of the material release and the ultra long term use.
● All parts of the products can be repaired and updated without exception, which can satisfy the requirements of multiple filling and storage and transportation.
● The compatibility of internal and sealed materials has been determined and the parts of which sealed materials have been selected.
● No more than 98% of the nominal volume shall be allowed when filling.
● When static stacking code, the proportion of internal load is greater than 1.4, which can be stacked up to four layers when the proportion of contents is less than 1.4.
● Please read and paste the instructions on the product before use.

Use attention
● This product is promoted at the bottom and will not allow the top lift.
● When transporting dangerous goods in this product, the medium bulk containers should be loaded into containers or vehicles for secondary protection. The container or vehicle shall have at least a rigid wall or fence with the height of a medium-sized bulk container. When the weight of the inner load is greater than 1.4, it can be transported by two layers.
● When the product is in transit or when it is released, the inclination must not exceed 20 degrees.
● Medium bulk containers should check their sealing performance regularly.
● Low temperature range for this product is used - 18 ℃ - + 55 ℃. In hot filling (not more than 60 ℃), should be liquid cooled to room temperature, and then screw down the lid.
● The ball valve and inner container are forbidden to receive external shock and collision.
● Low secondary recovery, return to the state of the container must be carefully check, such as inner container and whether the framework has been impact to form a leak or affect the normal unloading or stacking, special need to check valve installed in the valve root tighten nut and the integration of a container is tight.

20 inch container loading

40 inch container loading

Copyright@Jiangyin conbulk packing co.,ltd   Record number:苏ICP备12047110号   Tel:0510-86398888   Fax:0510-86396888   E-mail:conbulk@vip.163.com